M3-0.50 x 6 Socket Set Screw Cup Point DIN 916 Zinc Plated . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M3-0.50 x 5 Socket Set Screw Cup Point DIN 916 Zinc Plated . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M3-0.50 x 8 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M3-0.50 x 6 Socket Set Screw Cup Point DIN 916 A2 (18-8) Stainless Steel . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable.
M3-0.50 x 5 Socket Set Screw Cup Point DIN 916 A2 (18-8) Stainless Steel . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable.
M3-0.50 x 5 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M3-0.50 x 8 Socket Set Screw Cup Point DIN 916 A2 (18-8) Stainless Steel . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable.
M3-0.50 x 6 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M3-0.50 x 8 Socket Set Screw Cup Point DIN 916 Zinc Plated . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 10 Socket Set Screw Cup Point DIN 916 A2 (18-8) Stainless Steel . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable.
M4-0.70 x 12 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 12 Socket Set Screw Cup Point DIN 916 A2 (18-8) Stainless Steel . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable.
M4-0.70 x 16 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 10 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 12 Socket Set Screw Cup Point DIN 916 Zinc Plated . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 16 Socket Set Screw Cup Point DIN 916 A2 (18-8) Stainless Steel . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable.
M4-0.70 x 10 Socket Set Screw Cup Point DIN 916 Zinc Plated . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 20 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 30 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 25 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 8 Socket Set Screw Cup Point DIN 916 A2 (18-8) Stainless Steel . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable.
M4-0.70 x 6 Socket Set Screw Cup Point DIN 916 Zinc Plated . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 8 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
M4-0.70 x 6 Socket Set Screw Cup Point DIN 916 Black Oxide Alloy . A headless screw threaded the entire length. It has a hexagonal drive at one end and a cup-shaped indentation at the other end. The cup point is the most used style set screw. Designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 Rockwell C points and where cutting in of cup edge on the shaft is acceptable. Hardness: Rockwell C45-53.
