0-80 Machine Screw Nut SS 18-8 (A2) . These hex nuts in 18-8 stainless steel are for use with stainless steel machine screws in the corresponding diameter.
1-72 Hex Machine Screw Nut Zinc Plated . Manufactured from low carbon steel and Zinc plated to meet ASTM F1941, machine screw nuts are designed to be used specifically with machine screws.
1-72 Machine Screw Nut SS 18-8 (A2) . These hex nuts in 18-8 stainless steel are for use with stainless steel machine screws in the corresponding diameter.
1/2-13 x 1 1/2 Slotted Flat Machine Screw Zinc Plated . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength.
*Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
1/2-13 x 1 Slotted Flat Machine Screw Zinc Plated . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength.
*Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
1/2-13 x 1 Slotted Round Machine Screw Zinc Plated . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength.
*Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
1/2-13 x 4 Slotted Flat Machine Screw Zinc Plated . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength.
*Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
1/2-13 x 4 Slotted Round Machine Screw Zinc Plated . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength.
*Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
1/4-20 Hex Machine Screw Nut Zinc Plated . Manufactured from low carbon steel and Zinc plated to meet ASTM F1941, machine screw nuts are designed to be used specifically with machine screws.
1/4-20 Keps (Machine Screw Hex) Nut 18-8 Stainless Steel . Keps nuts (also referred to as a K-nut or washer nut) come with an attached, free-spinning washer. They are used primarily to make assembly more convenient. 18-8 stainless provides a high level of corrosion resistance.
1/4-20 Machine Screw Nut SS 18-8 (A2) . These hex nuts in 18-8 stainless steel are for use with stainless steel machine screws in the corresponding diameter.
1/4-20 x 1 Tamper Resistant Torx Button Head Socket Machine Screw Alloy (T-27) . Tamper resistant machine screws provide an additional layer of security by their drive design, which prevents their removal with ordinary screw drivers or insert bits. These machine screws conform to ANSI/ASME B18.6.3.
1/4-20 x 1 1/2 Tamper Resistant Torx Button Head Socket Machine Screw Alloy (T-27) . Tamper resistant machine screws provide an additional layer of security by their drive design, which prevents their removal with ordinary screw drivers or insert bits. These machine screws conform to ANSI/ASME B18.6.3.
1/4-20 x 1 1/2 Indented Hex Head Machine Screw Zinc . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength.
*Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
1/4-20 x 1 1/2 Phillips Flat Machine Screw 18-8 SS . These flat head machine screws in 18-8 stainless steel are used where both countersinking and corrosion resistance are required.
1/4-20 x 1 1/2 Phillips Flat Machine Screw Type F Zinc Plated . Flat Head thread cutting screw with machine screw thread with blunt tapered point. having multi-cutting edges and chip cavities. For heavy gauge sheet metal. aluminum, zinc and lead die castings, cast Iron, brass and plastic.
1/4-20 x 1 1/2 Phillips Flat Machine Screw Zinc . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength. *Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
1/4-20 x 1 1/2 Phillips Oval Head Machine Screw Zinc . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength.
*Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
1/4-20 x 1 1/2 Phillips Oval Machine Screw 18-8 (A2) Stainless Steel . These oval head machine screws in 18-8 stainless steel are used where both countersinking and corrosion resistance are required.
1/4-20 x 1 1/2 Phillips Pan Machine Screw 18-8 SS . These pan head machine screws in 18-8 stainless steel are used where both a raised type head and corrosion resistance are required.
1/4-20 x 1 1/2 Phillips Pan Machine Screw Type F Zinc Plated . Pan Head thread cutting machine screw with blunt tapered point. These screws have multi-cutting edges and chip cavities. For heavy gauge sheet metal. aluminum, zinc and lead die castings, cast Iron, brass and plastic.
1/4-20 x 1 1/2 Phillips Pan Machine Screw Zinc Plated . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength.
*Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
1/4-20 x 1 1/2 Phillips Truss Machine Screw 18-8 (A2) Stainless Steel . These truss head machine screws in 18-8 stainless steel are used where both a raised type head and corrosion resistance are required.
1/4-20 x 1 1/2 Phillips Truss Machine Screw Zinc Plated . A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screws. Machine screws form a fastening superior in strength to spaced thread screws. These machine screws are manufactured from AISI 1006-1022 or equivalent steel with a hardness of Rockwell B70-B100 and a *60,000 psi minimum tensile strength.
*Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. #4 and #5 machine screws which are shorter than 1/2 inch are not subject to tensile testing. Steel machine screws of diameters #6 to 1/2 inch inclusive, which are shorter than 1/2 inch are not subject to tensile testing.
